Scroll to Top
  1-847-295-6500 Call Buehler at 1-847-295-6500    Search Buehler
Wilson Rockwell 574 Hardness Tester

Wilson® RH2150 Hardness Tester

The Wilson RH2150 hardness tester is designed for high volume production labs and production floor Rockwell testing, as well as supporting worldwide research facilities with its vast amount of testing scales. The RH2150 is available in two different sizes, with a vertical capacity of 10 and 14 inch (254 and 356mm respectively). It is fully protected from outside influences with sheet metal casing and a loadcell protection. The intuitive user interface aligns with our DiaMet™ software – making it simple to learn and easy to use. A DiaMet™ package is available to have all advanced features of DiaMet™.
  • Auto-stop clamping device holds down the sample and secures it during the testing.
  • The adjustable LED workspace illumination highlights the test location to ensure clarity and full visibility.
  • Indenter extensions are optionally available in several sizes to enable testing also on hard to reach test locations (only usable with clamping device).
  • Standard 0.75 in(19mm) pin anvils are shared with the Wilson RB2000 and R574 testers to simplify accessories in a lab.
  • The operator panel can be adjusted on the frame or taken off completely to put aside the machine if needed – ensuring full flexibility and an ergonomic test process.
  • USB connection for easy data output to memory drives.
  • In conjunction with the clamping device, the external footswitch can be used in multiple ways:
    • Clamping and manual start
    • Clamping and automatic start
    • Manual release after test
    • Automatic release after test
  • Rockwell Fast Mode, achieving test results in seconds.
Benefits

Perfect Fit for Today’s Testing Labs

  • Complete new user interface was developed for the standalone configuration. Advanced statistical calculations, results graphing and easy test programmability streamline the testing process. Verification reminders trigger automatically to ensure compliance.

RH2150 Series Available in Two Load Ranges

  • Available in two load configurations. The RH2150 Twin has the complete loadrange, including superficial and regular Rockwell scales as well as Brinell depth loads up to 187.5kgf. The RH2150 Regular includes regular Rockwell scales as well as Brinell depth loads up to 187.5kgf.

Trusted Results – Intuitive Operation

  • Designed for high volume production labs and production floor Rockwell testing, as well as supporting worldwide research facilities with its vast amont of testing scales. The RH2150 is available in two different sizes, with a vertical capacity of 10 and 14 inch (254 and 356mm respectively). It is fully protected from outside influences with sheet metal casing and a loadcell protection. The intuitive user interface aligns with our DiaMet™ software – making it simple to learn and easy to use. A DiaMet™ package is available to have all advanced features of DiaMet™.

Advanced Functionality for Today’s Industries

  • The global expertise of Buehler is strong as it now includes more than a century of experience from Aerospace companies such as Wilson Instruments, Wolpert and Reicherter. With the design and manufacturing of the RH2150 tester, the DiaMet software and test blocks all in-house by Buehler, system integration is guaranteed. Smart software functions help the user with standards traceability.
Specifications
Wilson® RH2150 Hardness Tester Specifications
Test Load Range 1-187.5 kgf (9.,81 - 1838,7 N)
Test Load Type Closed loop
Indenter Holder Snap grip
Available Indenters Rockwell: Rockwell diamond cone 120°, 1/16”, 1/8”, ¼”, ½” carbide ball indenters
Rockwell Test Procedures ISO 6508-1, ASTM E18 A, B, C, D, E, F, G, H, K, L, M, P, R, S, V, 15N, 30N, 45N, 15T, 30T, 45T, 15W, 30W, 45W, 15X, 30X, 45X, 15Y, 30Y, 45Y
Plastic Testing Ball Indentation ISO 2039-1 HB5: 49N, 132N, 358N, 961N
Plastic Testing Ball Indentation ISO 2039-2 HRR, HRL, HRM, HRE
Rockwell Carbon Testing Ball Indentation DIN 51917 HR2.5: 7
HR5: 7, 20, 40, 60, 100, 150
HR10: 20, 40, 60, 100, 150
Brinell Depth Testing (non-standardized) HBW-T HBW-T2.5: 6.25, 15.625, 31.25, 62.5, 187.5
HBW-T5: 25, 62.5, 125
HBW-T10: 100
Machine Control 7” User Interface for data tracking, statistics, indirect verification, data export via USB or ethernet, physical start and stop buttons
Z Axis Automatic Z axis drive, physical up and down movement buttons
Clamping Device (optional) Unique clamping hat to hold samples in place before and during testing, clamping force 55 kgf (121lbs)
Workspace Illumination White LED for proper indent positioning
Maximum Specimen Height 254 mm [10 in]; 356 mm [14 in]
Maximum Specimen Weight 50 kg (centered on anvil)
Depth From Center Line 200 mm
Anvil 63mm flat anvil with 19mm pin, more anvils optional as well as T-slot table
Operating Temperature Range 10° to 38°C [50° to 100°F]
Humidity 10% - 80% non-condensing
Machine Dimensions (D × W × H) 600mm [28in] × 350mm [21in] × 1260mm [39.2in] (size 1) or 1360mm [41.2in] (size 2)
Accessory (optional) Flat anvils, V anvils, Jack rest, indenter extensions 2”, 4” and 6” (only with clamping device)
Machine Net Weight 125 kg (275lbs)
Power Supply 110 - 240V / 50 - 60Hz
Ordering
Related Products

Accessories/Consumables

Wilson Rockwell Test Blocks
Wilson Rockwell Test Blocks
Auto Clamping Device
Auto Clamping Device
T-Slot Table
T-Slot Table
Foot Switch
Foot Switch
DiaMet Software Package
DiaMet Software Package
Indenter Extension
Indenter Extension
2in [50mm]
Indenter Extension
Indenter Extension
4in [100mm]
Indenter Extension
Indenter Extension
6in [150mm]
Gooseneck Adapter Small
Gooseneck Adapter Small
Max. internal reach diameter 9.5mm
Min. inside diamter 14mm
Gooseneck Adapter Large
Gooseneck Adapter Large
Max. internal reach diamete 26mm
Min. inside diameter 35mm
Flat Anvil
Flat Anvil
2.5in [63mm]
Flat Anvil
Flat Anvil
7.5in [190mm]
V Anvil Shallow
V Anvil Shallow
0.5in [12.7mm] stem height
cylindrical parts < 0.25in [6.5mm]
V Anvil Shallow
V Anvil Shallow
1in [25mm] stem height
cylindrical parts < 0.25in [6.3mm]
V Anvil Standard
V Anvil Standard
for cylindrical parts > 0.25in [6.3mm]
Anvil Cylindron Jr.
Anvil Cylindron Jr.
for cylindrical parts 0.25 - 3in [6 - 7.6mm]
Anvil Cylindron
Anvil Cylindron
for cylindrical parts 2 - 8in [50 - 203mm]
Anvil for Ball Testing
Anvil for Ball Testing
for cylindrical parts 1/16 - 1in [1.6 - 25mm]
Eyeball Anvil
Eyeball Anvil
for pieces with slight taper
Pedistal Spot Anvil
Pedistal Spot Anvil
0.5 in [12.7mm] stem height
0.27in [7mm] spot diameter
Pedistal Spot Anvil
Pedistal Spot Anvil
1in [25mm] stem height
0.27in [7mm] spot diameter
Diamond Spot Anvil
Diamond Spot Anvil
for HR30T scale
0.39in [10mm] spot diameter
Videos
Wilson® RH2150 Hardness Tester
Wilson® RH2150 Hardness Tester

The Wilson RH2150 hardness tester is designed for high volume production labs and production floor Rockwell testing, as well as supporting worldwide research facilities with its vast amount of testing scales. The RH2150 is available in two different sizes, with a vertical capacity of 10 and 14 inch (254 and 356mm respectively).

Quick Links
Share
Quick Links
Share
Contact Information

41 Waukegan Road Lake Bluff, IL, 60044-1699

General: +1 847 295-6500

Sales: inside.sales@buehler.com

Service: eService Desk

Helpful Links
Legal
Connect with Us
2022 Calendar Entry
Buehler Microstructure Calendar Submission
Copyright© 2021 Buehler. All Rights Reserved. | 41 Waukegan Road, Lake Bluff, Illinois 60044 | +1 847 295 6500
Buehler Ltd., An ITW Company, strives to make its website accessible to everyone, including users with disabilities. If you are experiencing difficulty using our website, please email us at support@buehler.com or call at 1-800-BUEHLER (1-800-283-4537) and describe the difficulty or concern. If you would like assistance accessing the goods and services available on the website, please call 1-800-BUEHLER (1-800-283-4537) or email us at support@buehler.com, and we would be happy to assist you.