Specialty Grinding & Polishing

Some applications can benefit from a specialty product or solution. Unique holders are available for processing circuit boards along with a variety of abrasive lapping discs and powders.

Benefits
Specifications
Ordering
Related Products
Downloads

PC-Met Precision Wiring Board Accessory

High volume printed wiring board preparation system for use with EcoMet 300 and AutoMet 250/300 Power Head
Prepares up to 36 coupons simultaneously
Prepares reproducible cross-sections of through-holes down to 0.008”

PWB-Met Small Hole Accessory

High volume printed wiring board preparation system for use with EcoMet 300 and AutoMet 250 Power Head
Prepares up to 18 coupons simultaneously
Prepares reproducible cross-sections of through-holes down to 0.004"

FibrMet Discs

FibrMet Abrasive Discs are for fine grinding applications on glass, epoxy, or polymers and produces a fine surface finish.
50/pack

Abrasive Powders

Abrasive Powders are for fine grinding on cast iron, tin, or cloth-covered platens. They should be mixed with distilled water to achieve desired consistency.
5lb [2.3kg] containers

UltraPrep Lapping

UltraPrep Diamond Lapping Films are for fine grinding of hard materials such as ceramics. They provide a fine surface finish and gentle material removal.
5/pack

No specifications to show at the moment.

PC-Met Precision High Volume Printed Wiring Board Accessory
Part Number	Description
60-5090	PC-Met Kit
60-5053	PC-Met Coupon Pins 1.0625in [27mm] long (Qty 100)
60-5067	Cup, Extended Upper Mold Plate, 0.8in (Qty 6)
60-9000	Central Force Drive Adapter for AutoMet 250/300

PWB-Met™ Small Hole Accessory
Part Number	Description
60-5175	PWB Met Kit
60-5186	PWB Met Short Pin Loader
60-5084	PWB Met Pins

FibrMet™ Abrasive Discs (Qty 50)
Color	Micron	Material	4"[102mm] PSA Backed	8"[203mm] PSA Backed	12"[305mm] PSA Backed
	0.3 µm	Al₂O₃	69-3104	69-3174	69-3124
	1 µm	Al₂O₃	69-3103	69-3173	69-3123
	3 µm	Al₂O₃	69-3102	69-3172	69-3122
	9 µm	Al₂O₃	69-3101	69-3171	69-3121
	12 µm	Al₂O₃	69-3100	69-3170	69-3120

Abrasive Powders (5lb)
Abrasive Type	Grit Size ANSI[FEPA]	Micron	Part Number
Silicon Carbide	600 [P1200]	15 µm	40-6415-600-080
Silicon Carbide	1000 [P2000]	10 µm	40-6418-000-080
Aluminum Oxide	-	5 µm	40-6605-050-080
Aluminum Oxide	-	3 µm	40-6603-030-080

UltraPrep™ Diamond Lapping Films (Qty 5)
Color	Micron	8"[203mm] PSA Backed	8"[203mm] Plain Backed
	0.1 µm	15-6791	15-6792
	0.5 µm	15-6795	15-6796
	1 µm	15-6801	15-6802
	3 µm	15-6803	15-6804
	6 µm	15-6806	15-6807
	9 µm	15-6809	15-6810
	15 µm	15-6815	15-6816
	30 µm	15-6830	15-6831